Search Results
247 Products for "hus4 h"
Filter
- Description
- Hanger for concealed fastening of façade cladding using mechanical fasteners for rear fixing
- Height
- 63.5 mm
- Length
- 50 mm
- Material composition
- EN AW-6063 T66
- Description
- Stop drill bit (HMU)
- Connection end
- TE-C (SDS-plus)
- Working mode
- Drilling, Hammer drilling
- Base material
- Concrete
- Description
- Hanger for concealed fastening of façade cladding using self-tapping screws
- Height
- 63.5 mm
- Length
- 40 mm
- Material composition
- Aluminium EN AW-6063 T66
- Description
- Robust outdoor rotary laser level for horizontal levelling
- Accuracy
- ±0.5 mm at 10 m
- Operating range with laser receiver (diameter)
- 2 - 600 m
- Laser class
- <4.85 mW, 620-690 nm, Class 2 (EN 60825), Class II (FDA CFR 21 art. 1040)
Nuron
- Description
- Powerful cordless multitool with a StarlockMax interface, AVR and an oscillating angle of 4°
- Base material
- Drywall, Wood, Mortar, Paint, Wood with nails, Softwood (fir, pine, etc.), Cement, Metal, PVC, Timber
- No load RPM
- gear 1: 20000 rpm
- Triaxial vibration value for cutting board (ah,B)
- 2.5 m/s²
- Description
- Economical Torx screw for HUD universal plastic anchors (carbon steel, pan head)
- Base materials
- n/a
- Head configuration
- Round head
- Material, corrosion
- Carbon steel, zinc-plated
- Description
- Green beam combi-laser with 2 queues and 4 points for plumbing, leveling, aligning and squaring
- Accuracy
- ±3 mm at 10 m
- Max. operating distance (diameter)
- 40 m (lines), 100 m (lines, with receiver)
- Maximum operating time
- 8 h
- Description
- S-HP02SS Self-tapping screw for hidden-panel fastenings in light-ventilated facade applications
- Screw drive/recess type
- TX 25 HF
- Base materials
- High pressure Laminate
- Screw type
- Facade screws
- Description
- High-performance undercut anchor for cracked concrete (hot-dip galvanised)
- Material, corrosion
- Carbon steel, HDG (hot-dip galvanised)/sherardised
- Head configuration
- Externally threaded
- Approvals / test reports
- ETA, Fire, Seismic
- Description
- Post-installed hoist point for temporary suspensions during installation and maintenance in elevator shafts
- Material, corrosion
- Cast-iron, Multilayer coating
- Head configuration
- n/a
- Base materials
- Concrete (cracked), Concrete (uncracked)
- Description
- Green beam combi-laser with 2 queues and 4 points for plumbing, leveling, aligning and squaring (12V battery platform)
- Accuracy
- ±3 mm at 10 m
- Max. operating distance (diameter)
- 40 m (lines), 100 m (lines, with receiver)
- Maximum operating time
- 33 h
- Description
- Flange nut for HSU-R stone undercut anchor
No technical data available
- Description
- Economical hook/ring anchor for suspended fastenings in concrete
- Head configuration
- Closed eye bolt, Open eye bolt
- Environmental conditions
- Indoor, dry conditions
- Approvals / test reports
- N/A
- Description
- High-performance internally threaded insert for capsule and injectable hybrid/epoxy anchors (carbon steel)
- Material, corrosion
- Carbon steel, zinc-plated
- Environmental conditions
- Dry indoor
- Base materials
- Concrete (cracked), Concrete (non-cracked)
ultimate
- Description
- Threaded screw-in stud (Stainless Steel, Metric or Whitworth thread) for electrical connections on steel in highly corrosive environments
- Material
- Duplex stainless steel (1.4462)
- Product class
- Ultimate
- Description
- High-performance anchor rod for capsule and injectable hybrid/epoxy anchoring in concrete and masonry (8.8 carbon steel)
- Material, corrosion
- Carbon steel, zinc-plated
- Environmental conditions
- Dry indoor
- Base materials
- Concrete (cracked), Concrete (non-cracked), Masonry (hollow), Masonry (solid)
New
ultimate
- Description
- Threaded screw-in stud (multilayer coated carbon steel – corrosion protection comparable to HDG) for grating and multi-purpose fastenings on steel in mildly corrosive environments. Compatible with Hilti MT installation channels
- Material
- Carbon steel
- Thread size
- M8
- Product class
- Ultimate
New
ultimate
- Description
- Threaded screw-in stud (Stainless Steel) for grating fastenings on steel in highly corrosive environments
- Thread size
- M8
- Product class
- Ultimate
New
ultimate
- Description
- Threaded screw-in stud (multilayer coated carbon steel – corrosion protection comparable to HDG) for multi-purpose fastenings on steel in mildly corrosive environments
- Product class
- Ultimate
New
ultimate
- Description
- Threaded screw-in stud (Stainless Steel) for multi-purpose fastenings on steel in highly corrosive environments
- Material
- Duplex stainless steel (1.4462)
- Product class
- Ultimate
- Description
- High-performance anchor rod for capsule and injectable hybrid/epoxy anchoring in concrete and masonry (5.8 carbon steel)
- Material, corrosion
- Carbon steel, zinc-plated
- Environmental conditions
- Dry indoor
- Base materials
- Concrete (cracked), Concrete (non-cracked), Masonry (hollow), Masonry (solid)
- Description
- High-performance plastic anchor for frames (A2 stainless steel, hex head)
- Base materials
- Concrete (aerated), Concrete (cracked), Masonry (grout-filled CMU), Masonry (hollow), Masonry (solid)
- Head configuration
- Hex head
- Approvals / test reports
- ETA, Fire
- Description
- Hanger rail for the concealed attachment of façade panels using hangers
- Height
- 63.5 mm
- Width
- 22.5 mm
- Length
- 6000 mm
New
ultimate
- Description
- Threaded screw-in stud (stainless steel, metric thread) for grating fastenings on aluminium in highly corrosive environments
- Material
- Duplex stainless steel (1.4462)
- Thread size
- M8
- Product class
- Ultimate
New
ultimate
- Description
- Threaded screw-in stud (stainless steel, metric thread) for multi-purpose fastenings on aluminium in highly corrosive environments
- Material
- Duplex stainless steel (1.4462)
- Product class
- Ultimate
- Description
- High-performance anchor rod for capsule and injectable hybrid/epoxy anchoring in concrete and masonry (8.8 carbon steel, hot-dip galvanised)
- Material, corrosion
- Carbon steel, HDG (hot-dip galvanised)/sherardised
- Environmental conditions
- Indoor with temporary condensation, Outdoor (more than 1km to coast)
- Base materials
- Concrete (cracked), Concrete (non-cracked), Masonry (hollow), Masonry (solid)
- Description
- Galvanised pipe clamp with sound insulation and quick closure for high productivity in light-duty applications
- Approvals
- ETA
- Noise reduction
- 17 dB (A)
- Temperature resistance
- -40 - 110 °C
- Description
- Grating disc for use with threaded studs in highly corrosive environments
- Application
- Grating
- Approvals
- ABS, BV, DNV GL, LR
- For use with (tools)
- DX 460, DX 5, DX 6
- Description
- self-drilling screw (A4 stainless steel) without washer for aluminium façade fastenings (up to 4 mm)
- Screw drive/recess type
- Hexagon 8
- Washer size
- 13 mm
- Base materials
- Aluminium
- Description
- Ultimate-performance injectable hybrid mortar with approvals for post-installed rebar connections and anchoring structural baseplates
- Base materials
- Concrete (non-cracked)
- Base material condition
- Dry, Wet
- Approvals / test reports
- ETA, ICC-ES report (concrete)
- Description
- Setting tool for internally threaded sleeves
No technical data available
- Description
- Ultimate-performance anchor rod for adhesive capsules in cracked concrete (carbon steel)
- Material, corrosion
- Carbon steel, zinc-plated
- Environmental conditions
- Dry indoor
- Base materials
- Concrete (cracked), Concrete (non-cracked)
- Description
- Economical plastic impact anchor with carbon steel screw
- Head configuration
- Flat head
- Environmental conditions
- Dry indoor
- Approvals / test reports
- N/A
- Description
- Galvanised threaded rod with 4.8 steel grade
- Fire resistance (yes/no)
- No
- Material composition
- Steel grade 4.8 - DIN 976-1
- Surface finish
- Indoor Coated - Electro galvanised
- Description
- Economical plastic impact anchor with corrosion-resistant A2 stainless steel screw for outdoor use
- Head configuration
- Flat head
- Environmental conditions
- Dry indoor, Indoor with temporary condensation, Outdoor (more than 1km to coast)
- Approvals / test reports
- N/A
- Description
- Façade clamp for natural stone
- Material, corrosion
- Stainless steel, A4, Stainless steel, A2
- Head configuration
- n/a
- PROFIS software
- No
- Description
- High-yield nozzle foam ideal for sealing, filling and insulating gaps and cracks
- Foam yield (up to)
- 45 l
- Approx. tack-free time (at 23°C / 50% rel. humidity)
- 12 min
- Approx. cut time (at 23°C / 50% rel. humidity)
- 30 min
- Description
- Stainless steel (A4) channel connector for two-dimensional structures
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Stainless steel (A4) C-Channel profile for medium-duty applications
- Height
- 41.3 mm
- Material thickness
- 2 mm
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Description
- Stainless steel (A4) C-Channel profile for medium-duty applications
- Height
- 52 mm
- Material thickness
- 2.5 mm
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Description
- Stainless steel (A4) C-Channel bracket for medium-duty applications
- Material thickness
- Channel: 2 mm, Baseplate: 8 mm
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Stainless steel (A4) 90-degree heavy angle for connecting multiple MQ strut channels in medium/heavy-duty applications
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Inspection gauge for checking HSU-R stone undercut anchor drill hole geometry
No technical data available
- Description
- Inspection gauge for checking HSU-R stone undercut anchor drill hole geometry
No technical data available
- Description
- Stainless steel (A4) double C-Channel profile for medium-duty applications
- Height
- 41 mm
- Material thickness
- 2 mm
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Description
- Stainless steel (A4) C-Channel double-bracket for medium-duty applications
- Material thickness
- Channel: 2 mm, Baseplate: 8 mm
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Drill stand for heavy duty Hilti coring machines (see technical data for tool compatibility)
- Fixation mode
- Anchor and vacuum (optional)
- Angular coring
- Yes
- Column extension
- Yes
- Description
- Stainless steel (A4) 90-degree angle for connecting multiple MQ strut channels
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Drill stand for heavy duty Hilti coring machines (see technical data for tool compatibility)
- Fixation mode
- Anchor
- Angular coring
- Yes
- Column extension
- Yes
- Description
- Stainless steel (A4) pipe clamp without sound insulation for light-duty applications
- Material composition
- Stainless steel, 1.4571/1.4404 (A4) - EN 10088, AISI 316Ti / AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Column extension for Hilti core drill stands
- Additional accessory information
- 100 cm column extension for the DD-HD 30 drill stand
- Description
- Column extension for Hilti core drill stands
- Additional accessory information
- 30 cm column extension for the DD-HD 30 drill stand
standard
- Description
- Reciprocating saw blade for cutting 2-6 mm (1/16 - 1/4") thin metal
- Product class
- Standard
- Shank
- 1/2" universal shank
- Teeth per inch
- 18
- Description
- Stainless steel (A4) channel connector for joining any elements with a butterfly opening
- Tightening torque
- 40 Nm
- Material composition
- Screw: A4-70 - DIN ISO 3506-1, Nut: 1.4581 (A4) - DIN EN 10283, Plate: 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Description
- Self-drilling pan head screw (A2 stainless steel) with 12 mm washer for thin metal-to-metal fastenings (up to 4.0 mm)
- Screw drive/recess type
- TX 25
- Washer size
- 12 mm
- Base materials
- Carbon steel, Aluminium
- Description
- Stainless steel (A4) self-drilling screw without washer for profile-to-profile facade fastenings
- Base materials
- Aluminium
- Screw type
- Metal screws
- Environmental conditions
- Dry indoor, Indoor with temporary condensation, Outdoor with low pollution, Outdoor with moderate concentration of pollution, Outdoor, areas with heavy industrial pollution, Close proximity to roads, Coastal areas
- Description
- Stainless steel (A4) channel connector used as a longitudinal extender for MQ strut channels
- Material composition
- Stainless steel, 1.4404 (A4) – EN 10088, AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Material thickness
- 4 mm
- Description
- Stainless steel (A4) medium-duty base plate to fasten metric threaded rods with two anchor points
- Material composition
- Stainless steel, 1.4571/1.4404 (A4) - EN 10088, AISI 316Ti / AISI 316L
- Surface finish
- Outdoor Plus - Stainless Steel
- Environmental conditions
- Outdoor high pollution (C4 – high / C5)
- Description
- Self-drilling screw (A4 stainless steel) without washer for aluminium façade fastenings (up to 3 mm)
- Screw drive/recess type
- PH #2
- Base materials
- Carbon steel, Aluminium
- Screw type
- Metal screws