Accessories for Fasteners

Accessories for injectable mortars, including piston plugs and extension hoses

Mixers and extensions for injectable mortars

Extension hose to be used together with the HIT-SZ piston plug for injectable hybrid/epoxy mortal

Injectable mortar accessories for blowing out

Setting tool for short HKD anchors with an integrated SDS Plus (TE-C) stop hammer drill bit

Setting tool (HSC)

Setting tool – required for installation of HDA undercut anchors

Setting tool – required for installation of HSU-R stone undercut anchors

Setting tool for capsule anchor rods with hexagon heads

Setting tool for driving compatible expansion anchors into concrete

Setting tool – required for installation of HDA undercut anchors

Setting adapter for capsule anchor rods with hexagon heads

Setting tool for capsule anchor rods with conical heads

Setting tool for capsule anchor rods with Conical heads

Setting tool for internally threaded sleeves

Setting tool (HMU)

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

Setting tool

SDS-plus (TE-C) setting tool for drop-in anchors

SDS-plus (TE-C) setting tool for drop-in anchors

SDS-plus (TE-C) setting tool for drop-in anchors

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

Hand tool to increase speed, quality and safety when setting manual-set drop-in anchors

SDS-plus (TE-C) setting tool for drop-in anchors

SDS-plus (TE-C) setting tool for drop-in anchors

SDS-plus (TE-C) setting tool for drop-in anchors

SDS-plus (TE-C) setting tool for drop-in anchors

Roughening tool for diamond-cored holes in concrete

Accessories for X-BT-MF threaded studs, including sockets, T-handles and torque tools

Calibration card for S-BT threaded screw-in studs to ensure the correct screw-in depth

Torque-controlled socket wrench for setting HSA anchors

5 Nm torque tool for installing S-BT threaded screw-in studs on aluminium or steel (thickness < 6 mm)

Cheque gauge for screw anchors reusability verification in temporary fixings (HUS4, HUS3, HUS2) to attach to SIW impact wrench

Torque tool for use with new-generation X-BT threaded studs

Tool for HFB anchors

16 Nm torque tool for installing S-BT threaded screw-in studs on steel (thickness < 6 mm)

Injectable mortar accessories for brushing and guiding